By Larry Carley
Technical Editor

One of the first questions that should always be answered when diagnosing a fuel-related complaint on a fuel-injected engine is, “What is the fuel pressure?”

All too often, technicians assume fuel pressure is “good” without actually measuring it with a gauge. If the engine runs, they assume the injectors are getting adequate fuel pressure. If the engine cranks but won’t start, and they depress the service valve on the fuel rail and some fuel squirts out, they assume the injectors have pressure. They do, but the question remains, “How much pressure?”

For the engine to start and run smoothly with no stalling, hesitation or misfiring, the injectors have to deliver the proper amount of fuel with every squirt. This is especially important on late-model engines with sequential fuel injection. One bad injector will cause a noticeable misfire and usually set a P030X misfire code (where X represents the cylinder that is misfiring...