Underhood Service Advertise | Subscribe | Contact Us | About Us

Transmission Diagnosis Billings MT

Local resource for transmission diagnosis in Billings, MT. Includes detailed information on local companies providing auto services and which give access to transmission repair, transmission fluid, transmission failure, transmission additives, transmission leak sealers, transmission troubleshooting, fuel system repairs, transmission leak repair and to other transmission services.

Automatic Transmission CO
(406) 252-8011
1313 1st Avenue North
Billings, MT
Performance Automatic Transmission
(406) 245-5759
2122 1st Avenue North
Billings, MT
Automatic Transmission SYST
(406) 245-6502
430 S Billings Boulevard
Billings, MT
Top Tech Automotive
(406) 896-8324
1270 Lockwood Road
Billings, MT
Browns Auto Service Inc
(406) 259-4008
1144 Broadwater Avenue
Billings, MT
Louies and Deans Montana Truck
(406) 245-6621
516 Scott Street
Billings, MT
A A Transmissions
(406) 256-9107
2122 1st Avenue North
Billings, MT
Hansers Towing Recovery and Remediation Network
(406) 248-7795
430 South Billings Boulevard
Billings, MT
Browns West
(406) 651-4441
624 S 20th Street West
Billings, MT
AAMCO Transmission
(406) 656-0551
423 24th Street West
Billings, MT
Provided By:

Transmission Issues in Chrysler Intrepid


May 13, 2009

Automatic overdrive transmission goes into second gear (limp-in mode) and will not shift, and trouble codes for the transmission solenoid pack are stored in memory.

Affected Chrysler Intrepid Models:
1998-2002 2.7L, 1998-2001 3.2L, 1996-’97 3.3L and 1996-2002 3.5L

Symptom: Automatic overdrive transmission goes into second gear (limp-in mode) and will not shift, and trouble codes for the transmission solenoid pack are stored in memory.

Codes: P0750, P0755, P0760 and P0765

Problem 1 of 3: The transmission or electronic automatic transaxle (EATX) relay has a slower than normal response time causing the transmission control module (TCM) to set solenoid codes.

Test & Fix: Testing the response time of the transmission or EATX relay is usually unreliable. A quick test is to swap the relay with an identical relay on the vehicle or just replace it and retest.

Problem 2 of 3: The transmission solenoid pack has a solenoid winding that has higher or lower than normal resistance.

Test & Fix: Unplug the 8-way solenoid pack connector and check the resistance of each of the solenoid windings. Normal resistance is 1-3 ohms. Replace the solenoid pack if one or more solenoid windings have higher than normal resistance.

Problem 3 of 3: The TCM has one or more failed solenoid drivers.

Test & Fix: A labscope may be used to show that one or more solenoid drivers in the TCM is not fully grounding...

Click here to read the rest of the article from Underhood Service

© 2009 Babcox
3550 Embassy Parkway, Akron, OH 44333
330-670-1234
(FAX) 330-670-0874